1. Product Introduction of The TEMS 3000 Substation Equipment Condition Monitoring System
2. Product Feature And Application of The TEMS 3000 Substation Equipment Condition Monitoring System
Product Features:
High Voltage Joint Wireless Temperature Monitoring Devices
Capacitive Equipment Insulation Monitoring Devices
GIS Partial Discharge Monitoring Devices
Transformer Partial Discharge Monitoring Devices
Transformer Chromatogram Monitoring Devices
3. Product Details of The TEMS 3000 Substation Equipment Condition Monitoring System
| Device Type | Product Thumbnail | Device Name And Model | The Main Function | Main Technical Parameters |
| 'One remote' fault detection system for empty line |  |
"One remote" type overhead line fault indicator Elite-AT101 |
Short circuit and grounding fault detection Detection of overcurrent and stop power supply Device self-checking Local alarm indication Uploading alarm information |
Applicable voltage grade: 6-35kV Power supply: solar power, rechargeable lithium battery Communication interface: RADIO frequency (to data terminal) Alarm indication: number of bowl turns > 5000 times, flash duration > 3000 hours Reset mode: timing reset, power-on reset, remote reset Power consumption: static power consumption < 5μA, maximum power < 30mA Dimensions: 135mm (H) x 110mm (W) x 110mm (D) Protection level: IP66 |
 |
"One remote"overhead line fault indicator data terminal Elite-AD10 |
Receives and processes indicator upload information and forwards it to the master station SOE event storage Device self-checking |
Power supply: solar power supply, battery Communication interface: RADIO frequency (for fault indicator, up to 12 rent intervention) GSM/GPRS (for master station system) Power consumption: static power consumption < 80μA maximum power < 110mA Battery capacity: 12AH Size: 220mm (H) x 200mm (W) x 120mm (D) Protection level: IP65 |
|
| 'two remote' type overhead line fault detection unit |  |
'Two remote' type overhead line fault indicator Elite-AT102 |
Short circuit and grounding fault detection Load current, fault current and wire temperature measurement Remote parameter modification is supported Remote control local call and remote call main station Fifth/seventh harmonic acquisition Support system timing Device self-checking Local alarm indication Upload measurement data and alarm information |
Applicable voltage grade: 6-35kV Power supply: solar power supply, induction power, rechargeable lithium battery backup Communication interface: RADIO frequency (to data terminal) Load current: measuring range 0~1000A; Measurement accuracy: ±2% Wire temperature: measuring range -40℃~125℃; Measurement accuracy: ±0.5℃ Alarm indication: number of bowl turns > 5000 times, flash duration > 3000 hours Reset mode: timing reset, power-on reset, remote reset Power consumption: static power consumption < 20 mu A; Maximum power consumption < 30mA Dimensions: 135mm (H) x 110mm (W) x 110mm (D) Protection level: IP66
|
 |
'Two remote' type overhead line fault indicator data terminal Elite-AD20 |
Receives and processes indicator upload information and forwards it to the master station Receives and processes master station instructions and issues them to indicators Support system timing SOE time storage Device self-checking |
Power supply: solar power supply, battery Communication interface: RADIO frequency (for fault indicator, up to 12 rent intervention) GSM/GPRS (to system master station) Power consumption: static power consumption < 80μA maximum power < 110mA Battery capacity: 24AH Dimensions: 440mm (H) x 400mm (W) x 240mm (D) Protection level: IP65 |
4. Product Qualification of The TLMS 3000 Transmission Line Condition Monitoring System
5. Deliver, Shipping And Serving of The TEMS 3000 Substation Equipment Condition Monitoring System
Depending on the size of the order and the shipping distance (The usual delivery time is 1 month), and the warranty is 1 year. Besides, the terms of transaction are FOB full payment.
6. FAQ
Q: What's your lead time?'
A: Generally, the whole production cycle from raw material to finished product takes 15-30 days, but we can ship within 7 days and we can change according to quantity or other conditions as we have raw material stock semi-finished products.
Q: Are you a trading company or a manufacturer?
A: We are the original manufacturer, so we have the advantage of price.
Q: How long is the product life?
A: Our products are maintenance-free and sealed, using advanced technology, long service life, no problems in normal use.
Q: How to use the products?
A: Easy to use, please follow the instructions.
Q: Are your products' parameters real?
A: All our parameters are real, maximum quantity, competitive price and long life cycle.
Q: Do you have any OEM service?
A: If you purchase a certain quantity, we can also print your logo on the battery case.
Q: What is your MOQ?
A: The minimum order quantity is measured according to the product you order.
Q: What are your payment terms?
A: The payment shall be communicated in advance, and the contract shall be drawn up according to the time limit stipulated in the contract.
Q: What is your product standardization?
A: First according to The Chinese standard, then according to the international export standard.
Q: How long will it take you to provide us with the design?
A: Depending on your design requirements, it depends on how difficult it is.
